Harley-Davidson CRUISER M0412 - Manual (Page 19)

44
43
TM
19
M0412a-0920
ASSEMBLY F
Front View
42
• Fit the tachometer to the fork cover.
• Insert two #8 x ¾" screws into the tachometer and tighten.
Tachometer
Fork
Cover
• Slide the fender onto the ends of the handlebars. Make sure the
pegs on the fender slide over the tabs on the front fork.
Handlebar
Front Fork
Tabs Front Fork
Tabs
Handlebar
Fender
• The shock sets may be held together by rubber bands to aid
in assembly. After completing assembly step 44, remove and
throw away the rubber bands.
• Fit the inner and outer left shock halves together (they are
labeled on the inside with an “L”). Insert a #8 x ¾" screw into
the hole in the outer left shock and tighten.
• Fit the inner and outer right shock halves together (they are
labeled on the inside with an “R”). Hold the halves together
until the next step.
Outer Right
Shock Outer Left
Shock
Inner Right
Shock
Inner Left
Shock
45
• Fit the right shock assembly onto the end of the right handlebar.
Fit the left shock assembly onto the end of the left handlebar.
• Push firmly to slide the shocks onto the handlebars making
sure that the tabs on the inner shock halves fit into the grooves
in the fender.
Hint: You will need the help of another adult to hold the shocks
and fender in place for the next two assembly steps.
Left Shock
Right Shock
Grooves
Tabs
Right
Handlebar
Left
Handlebar