HONDA 2005 CB900F - Manual (Page 10)

©2005 American Honda Motor Co., Inc. - All Rights Reserved
7
13. Remove the motorcycle from the
crate base (cont.).
Remove the 6 and 8 mm bolts and right crate
shipping brace.
Remove the 6 and 8 mm bolts and left crate
shipping brace.
Discard the bolts.
Install and torque the 8 x 22 mm socket bolts
securing the footpeg brackets.
Torque: 27 N·m (2.8 kgf·m, 20 lbf-ft)
Lower the side stand and place the
motorcycle on a level surface.
Remove the slings.
Clean both sides of all the brake discs using
Pro Honda Brake Cleaner or equivalent and a
clean shop towel.
14. Install the mirrors.
Thread the mirrors into their mounts and
secure them by tightening their lock nuts.
15. Store the Owner’s Manual and
tool kit.
Insert the ignition key into the seat lock. Turn
the key clockwise to release the seat. Pull the
seat back and off the motorcycle.
BOLTS
BRACE
RIGHT SIDE:
BOLTS
BRACE
LEFT SIDE:
BOLT
RIGHT SIDE SHOWN:
MIRROR
LOCK NUT
KEY
SEAT