HP Photosmart D5400 series - Manual (Page 57)

This section contains the following topics:
• Remove red eye
• Edit photos using your computer
Remove red eye
The flash on a camera (especially on older camera models) can sometimes cause a
subject's eyes to appear red in your photos. The HP Photosmart is set to automatically
remove redness so that eyes appear the correct shade in your photos.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
To turn off automatic red eye removal
1. Insert a memory card into the appropriate slot on the product, or connect a storage
device to the front USB port.
2. Press Red-Eye Removal on the control panel to turn off red eye.
Edit photos using your computer
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card or storage device to your computer’s hard drive for advanced photo
editing, sharing photos online, printing from your computer, and creating special projects
such as printing a photo directly onto a printable CD or DVD.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the
HP Photosmart, or connect a storage device to the front USB port.
NOTE: The HP Photosmart must be connected to a computer that has the
HP Photosmart Software installed on it.
To edit photos
1. Insert a memory card into the appropriate slot on the product, or connect a storage
device to the front USB port.
The software opens on your computer.
2. Use the software on your computer to transfer the photos from the memory card to
your computer for viewing and editing.
Share photos using HP Photosmart Software
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card or storage device to your computer’s hard drive for advanced photo
Chapter 8
56 Use the photo features
Photos