HP 2910AL User Manual
Page 269
![background image](/manuals/95579/269/background.png)
Power Over Ethernet (PoE+) Operation
PoE with LLDP
Possible values for the PoE information are shown in table 11-4.
Table 11-4. Values for Displayed PoE Information
Name
Possible Values
Poe Device Type
• Type2 PSE
• Type2 PD
• Type1 PSE
• Type1 PD
Local Power Source
(from where the PSE is sourcing power to PD)
• Unknown
• Primary
• Backup
• Reserved
Remote Power Source
(from where the PD is acquiring power)
• Unknown
• Only PSE
• Only Local
• PSE and Local
Power Priority Values
• Unknown
• Critical
• High
• Low
Acknowledgement Values
For a PSE (local), this value is the response by the PSE
to the request from the PD. For a PD (remote), this value
is the response by the PD to the request from the PSE.
• Not part of ack/nack cycle
• Acknowledge
• Non Acknowledge
• Loss of Communication
11-19