Setting the camera image properties – Honeywell HD4UX User Manual
Page 19
Document 800-00031 Rev A
19
04/08
Setting the Camera Image Properties
The table below explains the options on the VIEWING menu.
<ATW Xtnd>
Automatic Tracking White Balance (Extended Range). Continuously monitors the color
temperature while an internal micro controller sets the white balance. Select this mode
when the scene illumination varies between indoor scenes and outdoor scene lighting.
Operating color temperature range is 2000K to 11000K.
>ADVANCED
WHITE BAL ..
Opens the ADVANCED WHITE BALANCE menu where you can adjust the magenta or
the white balance bias. Options are:
<MGNTA CTRL>. Select
<OFF>, <ON>, or
<CUSTOM> to open the MAGENTA CONTROL screen and, while observing the
video monitor, adjust the level, from 0 to 100 (5 is the default).
<WB BIAS> to adjust the level from -2K to 2K (0 is the default).
>AI THOLD
Adjust the Automatic Iris (AI) threshold, from -42 to 60 (-18 is the default).
Note
When using a manual iris lens, set the AI threshold to -42 (recommended).
The AI threshold is factory set to -18 for all WDR presets.
ADVANCED WHITE BALANCE
MGNTA CTRL
OFF
WB BIAS
-2K
0
2K
PREVIOUS PAGE .
>
!
VIEWING
FLIP
OFF
ID DISPLAY
<OFF>
SHARPNESS
NORMAL
BRIGHTNESS 110
80
130
RESOLUTION
NORMAL
COLOR ADJ.
0
-8
8
PREVIOUS PAGE .
>
!
!