HP 40gs - Manual (Page 346)

20-6 Notes and sketches
To import a
graphics variable You can copy the contents of a graphics variable into the
Sketch view of an aplet.
1. Open the Sketch view of the aplet ( SKETCH ).
The graphic will be copied here.
2. Press , .
3. Highlight Graphic, then press and highlight the
name of the variable ( G1, etc.).
4. Press to recall the contents of the graphics
variable.
5. Move the box to where you would like to copy the
graphic, then press .
The notepad
Subject to available memory, you can store as many
notes as you want in the Notepad (
NOTEPAD ).
These notes are independent of any aplet. The Notepad
catalog lists the existing entries by name. It does not
include notes that were created in aplets’ Note views, but
these can be imported. See “To import a note” on
page 20-8.
To create a note in
the Notepad 1. Display the Notepad
catalog.
NOTEPAD
2. Create a new note.
3. Enter a name for your
note.
MYNOTE
hp40g+.book Page 6 Friday, December 9, 2005 1:03 AM