HONDA 08V67-TE0-100A - Manual (Page 14)

14 of 15
AII 37561-38377 (0711) © 2007 American Honda Motor Co., Inc. – All Rights Reserved.
41. Using isopropyl alcohol on a shop towel, clean the
area where the harness tapes will attach.
42. At each green tape location, attach the back-up
sensor subharness to the rear bumper with four
harness tapes.
43. Plug the back-up sensor harness 6-pin connector
into the back-up sensor subharness 6-pin connector,
then reinstall the rear bumper. .
NOTE: Have an assistant help you install the rear
bumper
771107BB
BACK-UP SENSOR
SUBHARNESS
4 HARNESS
TAPES
4 GREEN
TAPES
761302AE
BACK-UP SENSOR
HARNESS
6-PIN CONNECTOR
CORNER
SENSOR
CORNER
SENSOR
REAR
BUMPER
RIGHT
CENTER
SENSOR
LEFT
CENTER
SENSOR
BACK-UP SENSOR
SUBHARNESS
6-PIN CONNECTOR
www.collegehillshonda.com