HONDA 08V67-TE0-100A - Manual (Page 3)

© 2007 American Honda Motor Co., Inc. – All Rights Reserved. AII 37561-38377 (0711)
3 of 15
2. Disconnect the negative cable from the battery.
3. Remove the two covers from the rear bumper and
remove the rear bumper (two bolts, six self-tapping
screws, two clips, and unplug one connector).
NOTE: Have an assistant help you remove the rear
bumper.
4. Remove the trunk floor mat (one clips).
742003CB
6 SELF-TAPPING
SCREWS
REAR
BUMPER
2 CLIPS
2 COVERS
2 BOLTS
CONNECTOR
742416BE
CLIP
TRUNK
FLOOR MAT
5. Remove the rear trim panel (five clips and three
hooks).
6. Fold down the rear seat back by pulling the lever
under the rear shelf inside the trunk.
7. Remove the left trunk side lining (five clips).
4 CLIPS
REAR TRIM PANEL
3 HOOKS
CLIP
REAR SEAT BACK REAR SHELF
LEVER (Pull.)
LEFT TRUNK
SIDE LINING 3 CLIPS
2 CLIPS
www.collegehillshonda.com