HP 3500 - Manual (Page 57)

5. Press to select SYSTEM SETUP.
6. Press to highlight JAM RECOVERY.
7. Press to select JAM RECOVERY.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press M
ENU
.
Language
The option to set the default language appears when the printer is turned on for the first
time. As you scroll through the available options, the list appears in the language that is
highlighted. When the list appears in the language desired, press
to set the language.
You can also change the language at any time by performing the following procedures:
To select language
1. Press M
ENU
to enter the MENUS.
2. Press to highlight Configure Device.
3. Press to select Configure Device.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight Language.
7. Press to select Language.
8. Press or to select the appropriate language.
9. Press to set the selection.
10. Press M
ENU
.
ENWW Changing printer control panel configuration settings 45