Disabling network protocols (optional) – HP 3500 User Manual
Page 69
11. Press
to select the desired link speed.
12. Press
M
ENU
to return to the Ready state.
Disabling network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols
has the following benefits:
●
decreases printer-generated network traffic
●
prevents unauthorized users from printing to the printer
●
provides only pertinent information on the configuration page
●
allows the printer control panel to display protocol-specific error and warning messages
Note
TCP/IP configuration should not be disabled on the HP Color LaserJet 3500 printer. If you
disable TCP/IP, you will lose the connection to the printer's embedded Web server page.
To disable IPX/SPX
Note
Do not disable this protocol if Windows 95/98, Windows NT, Me, 2000, and XP systems will
be printing to the printer using IPX/SPX.
1. Press
M
ENU
to enter the MENUS.
2. Press
to highlight Configure Device.
3. Press
to select Configure Device.
4. Press
to highlight I/O.
5. Press
to select I/O.
6. Press
to highlight EIO 1.
7. Press
to select EIO 1.
8. Press
to highlight IPX/SPX.
9. Press
to select IPX/SPX.
10. Press
to select ENABLE.
11. Press
to highlight OFF.
12. Press
to select OFF. The control panel displays a message that the setting has been
saved and displays an option to re-enable IPX/SPX.
13. Press
M
ENU
to return to the Ready state.
To disable AppleTalk
1. Press
M
ENU
to enter the MENUS.
2. Press
to highlight Configure Device.
3. Press
to select Configure Device.
4. Press
to highlight I/O.
5. Press
to select I/O.
6. Press
to highlight EIO 1.
ENWW
Network configuration
57