HP CM3530 - Manual (Page 63)

Menu item Sub-menu item Values Description
When Transparency Only is selected, the product
senses only the first page and recognizes only
overhead transparency types.
Optimize Background Normal (default)
Alternate 1
Alternate 2
Alternate 3
Adjust this setting if you are having problems with an
overall gray background on pages.
Registration Normal (default)
Alternate
Adjust this setting if you are having problems with color
misregistration.
Transfer Control Normal (default)
Alternate 1
Alternate 2
Alternate 3
Adjust this setting if you are having problems with faint
images repeated on the page.
Tray 1 Normal (default)
Alternate
Select the Alternate setting if you are having problems
with marks on the back side of the paper when printing
from Tray 1. This increases the frequency of the
cleaning cycle.
Environment Normal (default)
Low Temp
Adjust this setting if you are having problems printing
in low temperature and low humidity environments.
Line Voltage Normal (default)
Low Voltage
Adjust this setting if the product is operating in a low-
voltage environment and you are having problems with
print quality such as blisters in the printed image.
Tracking Control On (default)
Off
Do not adjust this setting unless an HP-authorized
support person recommends it.
Uniformity Control Normal (default)
Alternate 1
Alternate 2
Alternate 3
Adjust this setting if printed images have a mottled
appearance.
Normal Paper Standard (default)
Smooth
Adjust this setting if you are printing on normal-weight
paper that is very smooth.
Heavy Paper Standard (default)
Smooth
Adjust this setting if you are printing on heavy-weight
paper that is very smooth.
Envelope Mode Normal (default)
Reduced Temp
Adjust this setting if envelopes are partially sealed after
printing.
Resistance Mode Normal (default)
Up
Down
Adjust this setting if you are in a low-humidity
environment and you are having problems with loose
toner particles after printing.
Table 2-16 Print Quality menu (continued)
ENWW Print Quality menu 49