Disable network protocols (optional), Disable ipx/spx, appletalk, or dlc/llc – HP CM3530 User Manual
Page 97
Disable network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the
following benefits:
●
Decreases product-generated network traffic
●
Prevents unauthorized users from printing to the product
●
Provides only pertinent information on the configuration page
●
Allows the product control panel to display protocol-specific error and warning messages
Disable IPX/SPX, AppleTalk, or DLC/LLC
NOTE:
Do not disable IPX/SPX in Windows-based systems that print through IPX/SPX.
1.
At the product control panel, touch the down arrow until the
Administration
menu displays.
2.
Touch the
Administration
menu to open it.
3.
Touch the down arrow until the
Initial Setup
menu displays.
4.
Touch the
Initial Setup
menu to open it.
5.
Touch the
Networking and I/O
menu to open it.
6.
Touch the
Embedded Jetdirect
menu to open it.
7.
Touch the
IPX/SPX
menu to open it.
-or-
Touch the
AppleTalk
menu to open it.
-or-
Touch the
DLC/LLC
menu to open it.
8.
Touch the
Enable
option.
9.
Touch the
Off
setting, and then touch the
Save
button.
ENWW
Network configuration
83