Hasselblad 848 - Manual (Page 15)

1
Continue loading originals into holders and holders into the scanner
until you have either loaded all of your originals or used all 10 slots of
the Batch Feeder.
Go to your computer and run FlexColor. Use the batch scanning fea-
ture of the program to scan your originals as described in “Scanning
with the Batch Feeder” on page 16. See also your FlexColor documen-
tation for detailed instructions.
IMPORTANT: Do not touch or remove the original holders while the
scanner is running. Always stop scanning before removing holders. One
way to stop a scan in progress is to press the scanner on/off button ( C );
the scanner will then stop scanning, unload the current original holder
and shut down.
4.
5.