Hasselblad 848 - Manual (Page 27)


Click on the Align Feeder button. The Align Feeder window opens,
which will now guide you through the procedure of aligning the
feeder.
You have already loosened the nut, so just click on Continue .
The scanner moves into its adjustment (home) position and the Align
Feeder window updates with new instructions.
Place the adjustment tool in the slit between the first and second mag-
azine position on the Feeder as shown in Figure 9. Position the notch
at the end of the tool over the adjustment pin inside the Feeder.
5.
6.