Wall to vcr to tv using coaxial cable, Tv vcr set-top box – HP Home Theater System User Manual
Page 112
Advertising
106
HP Digital Entertainment Center
Wall to VCR to TV Using Coaxial Cable
1
Remove the coaxial cable at the input to the VCR.
2
Connect the coaxial cable to the input of a signal
splitter (available at electronics stores).
3
Connect two coaxial cables to the splitter outputs.
4
Connect one coaxial cable to the input of the VCR.
5
Connect one coaxial cable to the TV Source 1 in
back of the HP Digital Entertainment Center.
6
Connect a coaxial cable from the VCR out to one of
the TV inputs. Reserve an input connection on the TV
for the HP Digital Entertainment Center.
Existing setups with and without set-top box
Cable From Wall
Coaxial
Coaxial
TV
VCR
Cable From Wall
Coaxial
Coaxial
Coaxial
TV
VCR
Set-top box
Advertising