HP Home Theater System - Manual (Page 147)

Initial Configuration 141
Initial Configuration
Configuring Video
You may have to optimize your HP Digital Entertainment
Center video configuration to get the best image on your
TV/display screen.
Configuring Video Output
You can configure your HP Digital Entertainment Center
video for dual-display. For instance, you can view the
screen on your TV and your monitor if both are
connected. You can also set up additional displays. See
“Video Out to TV and Monitor” on page 67 to connect
your TV and monitor.
If you have a multichannel sound system, and the
broadcast is only 2-channel, you may not hear all the
sound; you may need to change your audio settings to
2.0/2.1. Then change the settings back for multichannel
broadcasts.
Video software can change periodically; check HP
Support for updates. Go to http://www.hp.com/
support and select your model number.
Select the configuration that most closely
matches your home system. See:
“Configuring Video Output” on page 141
“Dual screen” on page 142
“Adjusting the Desktop Display” on page 144
“Finding ATSC HDTV and Standard TV Channels” on
page 151
“Tuning the Desktop Display” on page 151
n
Your TV and monitor must be connected to
the HP Digital Entertainment Center before
turning on the power to see the display on
two screens.