Humax CX-FOX C II - Manual (Page 48)

8. Installation
GB47
User’s Manual
4. Append Symbol Rate
1. Select Append Symbol Rate using the  /  button and press
the OK or  button.
2. Select the symbol rate using the  /  button and press the
OK button.
3. It will be displayed symbol rates that you selected. The
product will search channels by all of symbol rates that you
selected.
5. Search
You can complete the setting and start searching.
1. Select Search and press the OK button to start the linear search.
2. The next procedures are similar to those for the automatic search. Please refer to 8.1 Automatic
Search.
8.3 Manual Search
If your product is connected to the cable and TV, you can search channels manually by searching
parameters, if you know the MUX information. Select Manual Search using the button and press the OK or
 button.
1. Frequency
1. Select Frequency using the  /  button and press the OK or
 button.
2. Select frequency value using the  /  button and press the
OK button.
3. When you select User Defi ne to set frequency manually,
enter frequency value using the NUMERIC(0-9) buttons.