Humax CX-FOX C II - Manual (Page 53)

GB52
User’s Manual
9. Software Update
3. Manual Update
You can perform the manual update only if you know MUX information of software update correctly.
1. Press the MENU button.
2. Select Installation using the  /  button and press the OK
or  button.
3. Enter the password using the NUMERIC(0-9) buttons.
4. Select Software Update using the  /  button and press the
OK or button.
5. Select Manual Update using the  /  button and press the
OK or  button.
6. Set Frequency which provides update software.
7. Select Symbol Rate. You can enter the specifi c value by
selecting User Defi ne.
Note: Setting parameters in Manual Update is similar to
setting parameters in the manual search. Refer to 8.3
Manual Search.
8. Select Search and press the OK button to search software.
9. It is displayed whether or not the new software exist. If new
software does not exist, press the OK button to return to the
manual update menu.
10. Select Yes and press the OK button to start updating. Select
No and press the OK button to return to the previous menu.
11. Performs the software update. Please wait until it is
completed.
12. When completing the software update, the product is automatically powered off and on again.