Humax CX-FOX C II - Manual (Page 50)

8. Installation
GB49
User’s Manual
8.4 Default Setting
Default Setting restores the product to the default settings.
Warning: Please note that once you perform the default setting, all data such as the channel list and
user confi gured data are deleted.
1. Press the MENU button.
2. Select Installation using the  /  button and press the OK
or  button.
3. Enter the password using the NUMERIC(0-9) buttons.
4. Select Default Setting using the  /  button, press the OK
or  button.
5. Select Yes and press the OK button to restore all setting to
the factory default. Select No and press the OK or BACK
button to return to the previous menu.
6. Confi rm again to start loading default setting. Enter the
password using the NUMERIC(0-9) buttons to perform
restoring.
7. When completing the default setting, the installation wizard
will run automatically. For detailed information about the
installation wizard, refer to the Chapter 3. Installation
Wizard.
Note: The default password is 0000. If you have forgotten your
password, please contact your local product distributor.