Henny Penny BCF-24/65/110 - Manual (Page 5)

Model BCF-24/65/110, BCM-110
3-3. BASIC OPERATION 4. Press to select the Chilling Mode or the Freezing Mode.
(Continued)
or and or , stay on with turned
to the OFF position.
5. Press to choose the Frigiprobe Mode or the Timer
Mode. With the Probe Mode selected, the digital display
alternately shows the core temperature of the product, and the
elapsed time of the cycle. If the Timer Mode is selected, the
digital display alternately shows the air temperature and the time
(hours and minutes) remaining in the cycle.
The buzzer sounds 1 minute after the Probe Mode is selected,
unless the temperature is above 140ºF (60ºC). Then the
buzzer sounds when 140ºF (60ºC) is reached.
6. Set the time in the Timer Cycle, if necessary, using . The
time is affected by the thickness of the food product, weight,
food loading temperature, and food’s packaging. The buzzer
sounds 1 minute into the Timer Cycle.
Avoid opening the door once the cycle has started. This
lengthens the time it takes to reach the desired temperature.
7. At the end of the cycle (40ºF (4ºC) in the Probe Mode)
the buzzer sounds and the unit automatically starts the Hold
Cycle. The buzzer sounds for 30 seconds, or press to
stop it. In the Hold Cycle, the product will be held at 37ºF
(3ºC) in the Chilling Mode, or at -0.4ºF (-18ºC) in the Freezing
Mode.
8. The product can remain in the unit for up to 12 hours, or
can be removed from the unit and placed in a cold storage
case.
605 3-5