Hitachi P50V702 - Manual (Page 11)

FIRST TIME USE
11
Quick Reference Remote Control Buttons and Functions
In addition to controlling all of the functions on your Hitachi Plasma TV, the new remote control is designed to operate different
types of devices, such as, DVD Players, CBL (Cable Boxes), set-top-boxes, satellite receivers, and VCRs. The remote control
must be programmed to control the chosen device. Please see pages 18~30 for a complete description of all features and
programming of the Remote Control.
The TV’s remote control sensor is located on the left bottom portion of the TV screen. To control TV functions, please point •
the remote control directly at the sensor for best results.
Pressing any button will illuminate the backlight for 4 seconds. •
Power On/Off
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to switch the selected device
On or Off standby.
(-) Dash/Sleep Button
(TV, SAT/CBL, PVR/VCR, DVD)
Press this button when the remote is in Set-Top-
Box mode (SAT) or when the TV uses a digital
input. In TV mode press to set your Sleep Timer
from 30 minutes to 3 hours.
Last Channel Button
(TV, SAT/CBL, PVR/VCR, DVD)
Press this button to switch between the current
and the last channel viewed.
Volume Buttons
(TV, AVR)
Press up (+) to increase or down (-) to decrease
the audio level of your TV.
Menu Button
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Accesses the OSD menu system.
EXIT Button
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to exit the OSD menu.
Cursor PAD/Select Buttons
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
The Cursor PAD is used to navigate through
the OSD and INPUT menu system, The Select
button is used to Set/Activate highlighted menu
items.
Input Select
(TV, AVR)
Press this button to change input mode.
Energy Save Button
(TV)
Press this button to set Power Consumption
reduction based on three levels (Min, Med, Max).
Pause Button
(TV, DVD, PVR/VCR)
Press this button to show and change the Freeze
mode of the TV. Also used to pause while in DVD
or PVR/VCR mode.
DVD/VCR CONTROL BUTTONS
(SAT/CBL, DVD, PVR/VCR, AVR)
Control the functions of your Satellite Receiver,
Set-Top Box, Cable Box, DVD, VCR, PVR and
AVR.
Device Buttons
(TV, DVD, PVR/VCR,
SAT/CBL, AVR)
Press these buttons to switch between your
devices.
Numeric Buttons
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press these buttons to manually enter
the channel and for numeric entry when
navigating through the OSD menu system.
Enter Button
(TV, DVD, PVR/VCR, SAT/CBL, AVR)
Press this button to use as a SELECT feature.
Channel Up/Down Buttons
(TV, PVR/VCR, SAT/CBL, DVD, AVR)
Changes up or down the channel.
Mute
(TV, AVR)
Reduces the audio level to 50% if pressed
once, and to complete mute if pressed twice.
Press it a third time to restore audio level.
Guide Button
(TV, SAT/CBL, PVR/VCR, DVD)
Press this button to access the program guide
of TV and other devices.
Info Button
(TV, DVD, SAT/CBL, PVR/VCR)
Shows the input signal status and other
information.
Picture Mode
(TV)
Picture mode can be changed each time
pressed in the following sequence.
Dynamic Day
Night
Favorite Channel Button
(TV, SAT/CBL)
Press to enter/access Favorite Channel mode.
Aspect
(TV)
Press this button to change picture size.
Picture-In-Picture (PIP) Button
(TV)
Press to show and change the PIP mode.
LEGENDS
TV - Television VCR - Video Cassete Recorder PVR - Personal Video Recorder
DVD- Digital Video Disc Player SAT - Satellite Receiver CBL - Cable Box
AVR - Audio/Video Receiver
NOTE