Hotpoint EW93 - Manual (Page 30)

30
Electronic Clock & Automatic Cooking Feature
Note 1: At any time. up to the start of the cooking period, the cooking end time will
automatically be reviewed. The information is displayed alternately with the cooking
temperature every 10 seconds.
Note 2: At any time during the cooking period, the cooking duration or end time can be reviewed
by pressing the corresponding button. The information will flash in the display and the
associated symbol will light. Simply press the same button again to go back to normal
review display, or wait 10 seconds and the display will return to the normal review
display automatically.
(b) To set the main oven to switch ON and OFF automatically
This allows you to cook for a specified duration and additionally choose the time you wish the cooking
cycle to finish. From this information the system works out when the cooking cycle will need to start
and automatically switches the oven on at the required time.
Follow STEPS 1 to 6 in previous section (a) entitled: ‘To set the main oven to switch on immediately
and off automatically’, then continue as below...
STEP 7 Press and release the ‘auto stop’ button.
The display will show a default cooking end time
(this will be the current time plus the cooking
duration you set in STEP 5).
The ‘auto stop’ symbol will also be lit.
STEP 8 Turn the Time/Temperature control to set the
time you wish the cooking to end, in 5 minute
increments.
The oven will switch off during this operation and
enter automatic mode.
Note: the end time uses a 24 hour clock.
STEP 9 Press the Time/Temperature control to confirm
your choice and set the cooking end time.
THE COOKING DURATION AND
END TIME IS NOW SET
At the end of the cooking duration, "End" will flash in the
display and an intermittent audible tone will be heard.
Turn the main oven selector to ‘O’, the off position to cancel
the audible tone and switch the oven off.
To cancel the automatic mode at anytime turn the main
oven selector to ‘O’, the off position.