Honeywell HD-DVR-1016 - Manual (Page 55)

Honeywell
41
time, system can activate the activation snapshot when alarm occurs,
and otherwise system just operates the schedule snapshot.
Image FTP
In Network interface, you can set FTP server information. Please
enable FTP function and then click save button.
Please boot up corresponding FTP server.
Please enable schedule snapshot or activation snapshot first, now
system can upload the image file to the FTP server.
After the system has booted up it will enter a default 24-hour regular mode.
You can set the record type and time in schedule interface.
Detect
Go to Detect Menu
In the main menu, from Setting to Detect, you can see motion detect
interface. There are three detection types: motion detection, video loss,
camera masking.
Motion Detection
The detection menu is shown as below. See Figure 4-15 .
• Event type: From the drop-down list you can select the “Motion
Detection” type.
• Channel: Select the video channel for the motion detection setting.
• Record Channel: Select the channel to activate the recording function
once the alarm has sounded. Please make sure you have set the MD
recording in the schedule interface (Main Menu
SettingSchedule)
and automatic recording in manual record interface (Main Menu-
>Advanced->Manual Record)