Configuration – Honeywell 96D User Manual
Page 19
Manning AirAlert-96d Gas Monitor
19073 AIRALERT96D 05/2006 Prelim REVC Copyright © 2006 Honeywell Analytics. All Rights Reserved.
19
7
Configuration
continued
The scroll mode is used to set the scroll interval of
the information pages displayed on the screen. Scroll
mode may be set to at three or five seconds, or it
may be set to manual only. The information page
displayed can always be controlled manually using
the arrow keys. The display will remain on the last
component selected only in manual mode.
• 3-Second
Scroll
• 5-Second
Scroll
• Manual
Scroll
The date and time are displayed in the following
format:
yyyy-mm-dd hh:mm:ss
(ISO 8601 standard, 24 hours format)
The desired display language is selected via Menu
Francais and English Menu. The selection is made
with the Enter key. When the display shows Menu
Francais, the current display language is English.
The language may be changed by pressing the
Enter key.
The user password can be edited and comes with a
default value of 9935 (last four digits of Manning’s toll
free phone number).
The Config window also features an option to
configure the slave port.
Relay configuration allows the relays to be set to
normal or failsafe mode. In the event of loss of power
to the controller, relays will change states if set to
failsafe mode.
Network (Auto-Programming of Network-
Related Parameters)
The functions of the Network menu serve to reset or
program information related to the network devices.
•
Reset Database (Resets all Tx Info database —
network device)
•
Network Scan (Auto detection of the network
devices)
•
Reset & Scan (Resets all Tx info database and
auto detection of the network devices)
Resetting the network device affects only the Tx
information: groups and events are not affected by
these function.
Network scan serves as an auto detection service of
network devices to configure the Tx information
database.
The statistics function allows the user to view details
about the 16 last entries such as:
• Valid
responses
• Communication
errors
•
Timeouts (no response)
6. Config
Set User Password
-9935-
Slave Port Cnfg
Slave Port Cnfg
Address: 001
384 bauds
Mdbs RTU 8D 2S NP
6. Config
Relay Configuration
AP Brdcst: auto
Manning Systems
7. Network
Reset Database
Scan Network
Reset and Scan
7. Network
Statistics