Hitachi HV-D25 - Manual (Page 28)

15
1-2 SPECIAL Menu Structure
To select the SPECIAL SET mode, press the SETUP button for 2 seconds while holding down the U button. Thus,
the SPECIAL SET menu can be displayed. To return to the DIRECT mode, press the SETUP button again. The
SPECIAL SET menu indicates a list of items, and each special items subsidiary menus are available. These menus
are arranged hierarchically as shown below. On the SPECIAL SET menu, most items have '->' mark at the right
side. For these items, press the R button, and the relevant item setup menu will come up. To return to the SPECIAL
SET menu, bring the cursor to the top line (title line of each subsidiary menu) and press the L button.
On each menu screen, bring the cursor to any desired item using the U or D button. For mode change/data setting,
use the L or R button.
< SPECIAL SET
REMOTE :9600bps
LENS :->
IRIS GATE :->
WHITE GATE :->
LEVEL :->
MASKING :->
OUTPUT/SYNC :->
ID/TITLE :->
DTL :->
< LEVEL (APP-1)
R BLK : 0
B BLK : 0
R GAIN : 0
B GAIN : 0
INTIALIZE
< IRIS GATE<ON>
GATE AREA(UP/DOWN)
GATE AREA(LEFT/RIGHT)
GATE AREA(LARGE/SMALL)
< WHITE GATE<ON>
GATE AREA(UP/DOWN)
GATE AREA(LEFT/RIGHT)
< ID/TITLE
ID :OFF
TITLE :OFF
DATA SET :>
L L
L L
L L
L L
L L
L L
R R
< MASKING<ON> (APP-1)
R HUE:- 2 R SAT: 11
Y HUE: 0 Y SAT: 0
G HUE: 0 G SAT: 2
C HUE: 0 C SAT: 7
B HUE: 2 B SAT: 12
M HUE: 9 M SAT:- 2
INITIALIZE
< OUTPUT/SYNC
OUTPUT :R,G,B
MONO :OFF
SYNC ON G :OFF
ΓΛ ΙΝ :75Ω
GL MODE :VBS
SC COARSE : 0•‹
SC FINE : 0
H PHASE : 0
DTL<ON>
LEVEL DEP. : 0
CRISP : 0
H/V BALANCE : 0
INITIALIZE
< DATA SET
ID :003
TITLE :HITACHI
1234567890_?
ABCDEFGHIJKL
MNOPQRSTUVWX
YZ<>+-*/.,:;
←→ EL INS RET
L L
L L
R R
L L
GAMMA :->
GAMMA<ON>
GAMMA TABLE :STANDARD
INITIALIZE
L L
TOTAL GAMMA : 0
R ADJUST : 0
B ADJUST : 0
< LENS (APP-1)
LENS TYPE :VIDEO
IRIS GAIN : 0
REFERENCE
H L