Connection to rc-c10 remote control box – Hitachi HV-D25 User Manual
Page 53
40
Connection to RC-C10 remote control box
The HV-D25 camera can be remotely controlled from the RC-C10 remote control box. Adjustments and operations not
provided on the RC-C10 panel can be set from the HV-D25 camera menu. RC-C10 buttons corresponding to the menu screen
are Option 1, Option 2, Auto White and Auto Black.
W
H
I
T
E
B
L
A
C
K
A
U
T
O
1
2
O
P
T
I
O
N
OPTION 2 button
functions as Setup
button
OPTION 1 button functions as
D button
AUTO BLACK button
functions as ABB/R button
AUTO WHITE button
functions as AWB/L
button
Labels indicating these functions are provided as accessories. Apply the labels to the camera buttons for convenience in
operation. The remainder of these Instructions assume the labels have been applied.
AWB
/L
ABB
/R
D
SETUP
Before connecting the remote control box, set the camera as follows.
1. SW405: Set camera internal switch SW405 to RC-C10. The factory setting is RC-C10. See page47.
2. Camera coms rate: At the Special Set menu (see page15), set Remote: 62500 bps (page22).
The factory setting is 62500 bps.
1. RC-C10 panel facilities