Hatco FR2 Series - Manual (Page 4)

MODEL DESCRIPTIONS
2
ALL MODELS
The Hydro-Heater mounts easily to the underside
of a holding vessel, leaving the entire vessel
area free. Units are shipped ready to install
with all gaskets and fittings. Hydro-Heaters include
a stainless steel front, powder coated body, a low-
water cut-off system and a convenient drain outlet.
FR2 MODELS
The Hatco FR2 model heaters are designed
to be used with a Bain-Marie or Food
Rethermalizer to heat or hold foods
at temperatures between 140ºF (60ºC) and 190ºF
(88ºC). The desired holding temperature
is maintained by a special electronic controller
and “free flow”technology.
UNITS WITH BUILT-IN TEMPERATURE
CONTROL
Units with built-in electronic temperature controller
and display are excellent for installations where
the unit is easily accessible and viewing
is not obstructed.
UNITS WITH REMOTE TEMPERATURE
CONTROL
Units supplied with remote electronic temperature
controller and display allow for easy operator
monitoring and temperature control.
Figure 1. Hydro-Heater
with Built-In Temperature Controller
Figure 2. Hydro-Heater
with Remote Electronic Controller
Form No. FR2M-0604