Henny Penny BFR/BCR-350 - Manual (Page 33)

Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350
G L O S S A R Y
Refrigerated Equipment
air temperature probe a temperature sensing device that controls the temperature after the Chilling
Cycle has been completed
ballast a device located on a fluorescent lamp fixture that helps the lamp power up
quickly
chilling the feature that cools products to a safe temperature
compressor the unit that pumps the refrigerant through the system
condenser a part of the system that changes the refrigerant to a liquid
cycle an operational process such as chilling, freezing, hold, timer
defrosting / de-icing the feature that prevents ice build up inside the unit
evaporator a part of the system that changes the refrigerant to a gas
evaporator probe a temperature sensing device that stops the de-icing cycle when completed
freezing the feature that quickly freezes product
Frigiprobe a temperature sensing device that is inserted into the product
hold the feature that maintains the product at a safe temperature
LED a light which illuminates to indicate the cycle or mode is in use
mode a programming segment used to set up the various cycles, such as chilling,
freezing, hold, timer, Frigiprobe
product a food item chilled or frozen in the unit
refrigerant a chemical coolant used by the refrigeration system
setpoint a preset chilling or freezing temperature; the setpoint is a programmable feature
technical mode used to program the unit’s feature
timer the feature that chills and freezes on a timed basis rather than using the
Frigiprobe
603 G-1