HP 2610-PWR User Manual

Page 10

Advertising
background image

Planning a QoS Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

Prioritizing and Monitoring QoS Configuration Options . . . . . . 6-15
Policy Enforcement Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
QoS Resource Usage and Monitoring . . . . . . . . . . . . . . . . . . . . . . 6-15
Planning and Monitoring Rule Usage . . . . . . . . . . . . . . . . . . . . . . 6-16
Managing QoS Resource Consumption . . . . . . . . . . . . . . . . . . . . . 6-16
Troubleshooting a Shortage of Rule Resources . . . . . . . . . . . . . . 6-17
Examples of QoS Resource Usage . . . . . . . . . . . . . . . . . . . . . . . . . 6-18

Using QoS Classifiers To Configure QoS for Outbound Traffic . . . . . . . . 6-20

Assigning an 802.1p Priority to IPv4 Packets on the Basis

Assigning an 802.1p Priority to IPv4 Packets on the Basis

Assigning a DSCP Policy on the Basis of the DSCP

Example of Changing the Priority Setting on a Policy When

Viewing the QoS Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20

No Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21

QoS UDP/TCP Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21

Assigning 802.1p Priority Based on TCP or UDP Port Number . 6-22
Assigning a DSCP Policy Based on TCP or UDP Port Number . 6-24

QoS IP-Device Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28

Assigning a Priority Based on IP Address . . . . . . . . . . . . . . . . . . . 6-29
Assigning a DSCP Policy Based on IP Address . . . . . . . . . . . . . . 6-30

QoS IP Type-of-Service (ToS) Policy and Priority . . . . . . . . . . . . . . . 6-34

of the ToS Precedence Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-35

of Incoming DSCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-36

in IPv4 Packets Received from Upstream Devices . . . . . . . . . . . 6-40
Details of QoS IP Type-of-Service . . . . . . . . . . . . . . . . . . . . . . . . . 6-43

QoS VLAN-ID (VID) Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46

Assigning a Priority Based on VLAN-ID . . . . . . . . . . . . . . . . . . . . 6-46
Assigning a DSCP Policy Based on VLAN-ID (VID) . . . . . . . . . . . 6-48

QoS Source-Port Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-52

Assigning a Priority Based on Source-Port . . . . . . . . . . . . . . . . . . 6-52
Assigning a DSCP Policy Based on the Source-Port . . . . . . . . . . 6-54
Steps for Creating a Policy Based on Source-Port Classifiers . . 6-54

Differentiated Services Codepoint (DSCP) Mapping . . . . . . . . . . . . . 6-58

Default Priority Settings for Selected Codepoints . . . . . . . . . . . . 6-59
Quickly Listing Non-Default Codepoint Settings . . . . . . . . . . . . . 6-60
Effect of “No-override” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-61

Note On Changing a Priority Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-61

One or More Classifiers Are Currently Using the Policy . . . . . . 6-62

IP Multicast (IGMP) Interaction with QoS . . . . . . . . . . . . . . . . . . . . . . . . . 6-65

viii

Advertising
This manual is related to the following products: