HP 2610-PWR - Manual (Page 329)

ProCurve Stack Management
Configuring Stack Management
To remove a Member from a stack, use the Stack Management screen.
1. From the Main Menu, select:
9. Stacking...
4. Stack Management
You will then see the Stack Management screen:
For status descriptions,
see the table on page
8-47.
Stack Member List
Figure 8-13. Example of Stack Management Screen with Stack Members Listed
2. Use the downarrow key to select the Member you want to remove from
the stack.
Figure 8-14. Example of Selecting a Member for Removal from the Stack
3. Type [D] (for Delete) to remove the selected Member from the stack. You
will then see the following prompt:
Figure 8-15. The Prompt for Completing the Deletion of a Member from the Stack
8-23