HotBrick VPN 800/8 F - Manual (Page 42)

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
Security Management – Access Filter
The network administrator can use the Access Filter to control the Internet access and applications available
to LAN users.
 Five (5) user groups are available, and each group can have different access rights.
 All PCs (users) are in the Default group, unless assigned to another group on the Host IP
screen.
Access Group - This allows you to create different access rights for different Groups of PCs.
 If you want the same restrictions to apply to everyone, select Default for the Group. In this
case, there is no need to enter any Hosts on the Host IP screen.
 If you wish to apply different restrictions to different Groups, select the desired Group. The
update will apply to the selected Group only.
ICMP – Filters - If you enable ICMP Filter, the ICMP request packet types specified will be blocked
from the local host to the remote side.
42