HotBrick VPN 800/8 F - Manual (Page 57)

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
 Policy Name List – When adding a new Policy, ignore this list. To edit an existing entry, select it from
thelist and then click the"Select" button.Thedata fieldswill beupdated with data for the selected
entry.
 Policy Name – Enter a suitable name. Generally, you should use the"Policy Name" for thenetwork
traffic typefor ease of identification.
 Source Address – Definethe source address of packets here. It has two types: IPaddress or MAC
address. If you select IP address you can definetheIP address range; otherwise you can define
up to four MAC addresses.
 Destination Address– Definethe destination address of packets here. The explanation is as thesame
as above.
 Protocol Type– Thefield defines traffic packet type, i.e. IP, TCP and UDP.
 Source Port – Define the source port of the packets here.
 Destination Port – Define thedestination port of thepackets here.
 Priority Queue– Determines if a packet meets all conditions defined above andwill beserviced with a
defined priority level.
57