HotBrick VPN 800/8 F - Manual (Page 70)

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows settings.
Restart your PC to ensure it obtains an IP Address from the VPN 800/8 F Firewall Router.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the following
changes:
 If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
 On the Gateway tab, enter VPN800/8 F Firewall IP address in the New Gateway field
and click Add, as shown below. (Your LAN administrator can advise you of the IP Address
they assigned to the VPN800/8 F Firewall.)
Statistics
70