Hyundai H-CMD4004 - Manual (Page 16)

16
General operation
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET
button on the panel to restore the unit to the original factory settings.
Power on/off
Press PWR/MU button on the panel or PWR button on the RC to turn the unit on. Long press PWR/MU button
on the front panel or briefly press PWR button on the RC to turn the unit off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn
the unit on it will resume the stored status, which you set.
Volume control
Rotate the VOL knob on the panel or press +/ – buttons on the RC to adjust the volume level.
Mute function
Press PWR/MU button on the panel or MU button on the RC to mute volume control. Press MU, EJECT, SEL,
PWR, MODE or +/- buttons to resume the volume.
Setting the sound characteristics
Press SEL button to select the mode: VOL => BAS => TRE => BAL => FAD. Press +/- buttons on the RC or
rotating the VOL knob to adjust each mode.
Note:
If turning off the power all the settings of each mode will be saved.
If turning off the ACC power all the settings will become as they were set on the plant as current.
Mode control
Press MOD button on the panel or MODE button on the RC to select the different playing modes: => TUNER