Hyundai H-CMD4004 - Manual (Page 23)

23
SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc.
Capacity: 8 MB ~ 1 GB.
MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.
Capacity: 16 MB ~ 1 GB.
Loading a disc
1. Turn the power on.
2. Press EJECT button on the panel to flip it down. Insert the disc with the printed side facing upward into the
slot. Press EJECT button on the panel to eject the disc. The panel will be closed automatically.
3. Playback will start automatically.
Inserting the SD/MMC card/USB device
Insert the MMC/SD card or USB device into MMC/SD compartment or USB socket. The SD/MMC slot is
situated on the top side of the front panel, so, when you want to insert a card, you need to remove the front
panel. When you want to pull out the card, firstly push it, and then pull it out.
After you inserted a storage, the monitor will display the root menu of the USB storage or MMC/SD Card.
Playing/pausing
When the disc/card/USB device has been already loaded the playback of the first track starts automatically.
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
OR press PLAY/PAUSE button to start playback. Press it again to pause the playback. Press again to resume
the playback.
Stop playback
During disc playing, press STOP button on the RC. Playback will be stopped. If the PLAY/PAUSE button is
pressed, playback will start from the position at which it was stopped. If the disc is removed, the resume
function is cancelled.