Hyundai H-CMD4004 - Manual (Page 19)

19
Auto memory store function
Press and hold for 2 seconds APS button on the RC or A.P. button on the panel to enter auto store mode. The
radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To
stop auto store, press this button again.
Mono/Stereo selection
Press ANGLE/ST button on the RC to select the sound channel: MONO or STEREO.
Local radio station search
Press LOC button on the RC shortly to turn the LOCAL function ON or OFF. When the LOCAL function is on
the local stations (stations with weak radio signal) can be played. When the LOCAL function is off both local
and distant stations (stations with strong radio signal) can be played. Press the button again to turn it of.
RDS function
There are the PI, PS, TP, PTY, TA, AF.
PI: Program Identification Code – for identifying code.
PS: Program Service Name Broadcast – station name data expressed in alphanumerically character.
TP: Traffic Program Identification – for traffic information broadcasting station.
TA: Traffic Announcement Identification – showing traffic information is being transmitted or not.
AF: Alternative frequencies – frequency list of broadcasting station transmitting the same program.
AF (Alternative Frequencies) function
Press AF button briefly to switch on/off mode. Symbol “AF” will appear on the display.
Note: The tuner will return to Alternative Frequencies whenever the reception signals getting worse.
“Alarm” will be displayed when an emergency broadcasting is received. Meanwhile sound output level will be
adjusted to the preset output level automatically when the volume control is set at minimum.