Hyundai H-CMD4004 - Manual (Page 27)

27
3. Press OK or PLAY/PAUSE button on the RC to start playback.
Programming the playback For DVD
1. Press PROG button on the RC to enter program list.
2. Use cursor buttons on the RC to move to desired position, and digit buttons
to enter the number of the desired one to be on selected position.
For DVD select title and chapter number.
For VCD, CD, MP3, WMA, select track number.
3. Move the cursor to select PLAY and press OK to play.
4. If you want to delete the list, move the cursor to CLEAR, press OK to delete
all the list set before.
5. Press PROG again to exit program play
On-screen display (OSD)
During playback press OSD button on the RC repeatedly to turn on/ off the playback status.
In DVD mode the display will show the following: The number of the playing title => the number of the
playing current chapter => the elapsed time of the playing chapter => the remained time of the playing
chapter => the elapsed time of the playing title => the remained time of the playing title.
In VCD/CD mode the display will show the following: The number of the playing track => the elapsed
time of the playing track => the remained time of the playing track => the elapsed time of the disc => the
remained time of the disc.
In MP3/WMA mode the display will show the following: The number of the playing track => the elapsed
time of the playing track => the remained time of the playing track.
For VCD/MP3/WMA/CD