Huffy 1C4880-A01 - Manual (Page 14)

This section covers the assembly of the rear reflector to the rear reflector bracket. Determine which
style you have before beginning assembly.
Snap In Style Screw In Style
Rear Reflector Bracket and Red Reflector Assembly
1. Assemble the red reflector to the rear reflector bracket:
WARNING: Install the red reflector exactly as shown or it will not operate correctly.
Snap In Style
- Push the reflector [1] onto the reflector bracket [2]
- Make sure the stud [3] on the reflector goes into the hole [4] of the bracket with a “snap” sound.
Screw In Style
- Put the reflector onto the reflector bracket
- Make sure the studs on the back of the reflector go into the holes of the reflector bracket
- Put the screw [?] through the bracket and into the reflector
- Tighten screw.
Reflector Assembly