Huffy 1C4880-A01 - Manual (Page 32)

Attach the bag to the handlebar:
- Put bag against the front of the handlebar
- Wrap fasteners around the handlebar and push together
- Make sure the bag does not cover any reflectors
- If the bag covers any reflectors, turn the bag toward the rider
- Wrap fasteners around the handlebar and push together.
Frame Bag
Assemble the bag to the bicycle frame:
- Put the bag under the top tube and in front of the seat tube of the bicycle frame
- Wrap each fastener around the frame tube and push together.
Saddle Bag
Attach the bag to the bottom of the seat and to the seat post or seat pillar:
- Put the bag against the bottom of the seat [9]
- Wrap the fasteners around the seat post (or seat pillar) and around the frame under the seat
NOTE: Some seat bags have one fastener on top that goes around the wire between the springs as
shown. Other seat bags have two fasteners on top which go around the frame under the seat.
WARNING: Some models have rear reflectors mounted to the seatpost. Make sure the
position of the rear bag does not interfere with the visibility of the rear reflector when viewed
from behind.
- Push fasteners together.
Handlebar Bag