Huffy 1C4880-A01 - Manual (Page 4)

The Owner’s Responsibility
WARNING: This bicycle is made to be ridden by one rider at a time for general transportation
and recreational use. It is not made to withstand the abuse of stunting and jumping.
If the bicycle was purchased unassembled, it is the owner’s responsibility to follow all assembly and
adjustment instructions exactly as written in this manual and any
“Special Instructions” supplied and
to make sure all fasteners and components are securely tightened.
If the bicycle was purchased assembled, it is the owner’s responsibility, before riding the bicycle for
the first time, to make sure the bicycle is assembled and adjusted exactly as written in this manual
and any
“Special Instructions” supplied and to make sure all fasteners and components are securely
tightened.
Fitting the Rider to the Bicycle
To determine the correct size of bicycle for the rider:
- Straddle the assembled bicycle with feet shoulder width apart and flat on the ground
- There must be at least one inch of clearance [1] between the highest part of the top tube [2] and
the crotch of the rider
- The minimum leg-length for the rider is the highest part of the top tube plus one inch [3].
Rules of the Road
WARNING: Failure of the rider to obey the following “Rules of the Road” can result in injury
to the rider or to others.
- Obey all traffic regulations, signs, and signals.
- Always wear a bicycle helmet that meets Snell and CPSC safety standards, as well as local safety
standards.
- Do not ride at night.
- If you choose to ride at night: