Hitachi VT-FX6404A - Manual (Page 28)

28
4 Press the cursor button to select AUTO BLUE "ON" or "OFF".
ON: The screen becomes blue and mutes sound when a channel without a broadcast signal on the VCR or a
channel on which broadcasting has finished.
• If the signal is too strong, this function may not operate even if you specify <ON>. During
playback this function does not operate.
OFF: The AUTO BLUE feature is switched off.
5 Press the GUIDE button to end the setting.
CABLE BOX SETUP
The following setup allows the VCR channel to automatically switch to the cable box output channel during
delayed recording.
Note: This setup should be performed if you receive all channels through a cable box.
(Hookups [E], [F], or [G]).
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.