Playback – Hitachi VT-FX6404A User Manual
Page 31
31
10 Using the VCR remote, press the
or
cursor button to enter the cable box output channel
numbers.
11 Press the GUIDE button to end this setting.
The cable box output channel has now been set. However, the VCR does not control your cable box. Turn on the
cable box and leave it tuned to the channel you want to record before the recording is scheduled to begin.
Note: If you make a mistake when entering digits, press the REW button to return the white dash "---". Then,
press the
or
cursor button to enter the correct number.
PLAYBACK
•
To playback a recorded tape
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Insert a recorded tape.
The power comes on automatically.
When a cassette without its safety tab is inserted, playback starts automatically.