Hitachi VT-FX6404A - Manual (Page 33)

33
Movie Return
If your video cassette has the safety tab removed, the VCR will stop and automatically rewind the videocassette,
eject it, and turn off the power when it reaches the end of the tape or a blank section of tape which lasts for more
than 30 seconds
Note: This function works only in PLAYBACK mode, not in RECORDING mode.
Rewinding or fast forwarding a tape at high speed
This function rewinds or fast-forwards T-120 tape for about 83 seconds.
This time period will vary for different types of tape.
Press the REW or F.FWD button, then press it again.
To stop the tape, press the STOP button.
Note: During super rewind/fast-forward, there will be an interval of 5 seconds between the time the STOP button
is pressed and the tape actually stops. This is designed to protect the tape. To stop the tape earlier, press the
REW or F.FWD button to restore the normal rewind/fast-forward speed, then press the STOP button.
To remove noise from the picture
Auto Tracking
Pressing the PLAY button starts the auto tracking feature, which automatically adjusts playback to eliminate static
lines or picture noise that may appear on the screen.
Manual Tracking
Scratched tapes or poorly recorded tapes may require additional picture adjustment. You can do this with the
remote control.