HP Quality Center Synchronizer 1.2 - Manual (Page 51)

Chapter 3 • Creating Synchronization Links
51
You can edit the following fields:
➤ In the Link name box, edit the name of the link.
➤ In the Link description box, edit the description of the link.
4 Click the Connectivity tab.
5 (Optional) You can edit the settings used to connect to each endpoint. This
is useful, for example, if the logon credentials change, or if you want to
modify the link to synchronize a different project. For more information on
these settings, see “Creating Links” on page 45.
6 (Optional) To check the connection to an endpoint, click the Check
Connectivity button for the endpoint. If the Synchronizer can connect to
the endpoint, a confirmation message displays.