HP Quality Center Synchronizer 1.2 - Manual (Page 55)

Chapter 3 • Creating Synchronization Links
55
3 Select Enable scheduling to enable scheduling of link tasks.
4 Select Run incremental synchronization task to run incremental
synchronization tasks automatically for the link. For more information on
incremental synchronization tasks, see “Incremental Synchronizations” on
page 41. The following options are available:
➤ Schedule every. Runs incremental synchronization tasks for the link at
the specified time interval. The time interval can be specified in minutes
or hours. The first time interval starts when you start the Synchronizer
server. By default, the time interval is set to 30 minutes for defects
synchronization, and 8 hours for requirements synchronization.
Note: You cannot schedule an incremental synchronization to run more
frequently than five minutes.
➤ Run task at. Runs incremental synchronization tasks on the link at the
specified time each day. By default, tasks run every day.
Click the browse button to open the Days of Week dialog box, and select
specific days of the week to run the task. On these days, the tasks will run
at the time you specified in the Run task at option.