HP Quality Center Synchronizer 1.2 - Manual (Page 67)

Chapter 3 • Creating Synchronization Links
67
Mapping Endpoint Fields
You map fields between the two endpoints in a synchronization link.
To map endpoint fields for a link:
1 Verify that you are working in edit mode. For more information, see
“Editing Synchronization Link Settings” on page 99.
2 Navigate to the Field Mapping tab.
➤ For a defects link, in the Links list, select the link and click the Field
Mapping tab.
➤ For a requirements link, in the Links list, expand the link, select a
requirement type mapping, and click the Field Mapping tab.
Alternatively, from the Subtypes Mapping tab, under Mapped Subtypes,
select a requirement type mapping and click Configure.
The field mapping configuration options are displayed.