Hampton Direct H35-NG1 - Manual (Page 15)

Hampton ® H35 Direct Vent Freestanding Gas Stove 15
VENTING ARRANGEMENTS
HORIZONTAL TERMINATIONS USING RIGID PIPE
Dura-Vent Snorkel Termination Riser Vent Termination
The two diagrams show all allowable com-
binations of straight horizontal termination
using Rigid Pipe. Restrictor position "A".
Venting Arrangements -Straight Horizontal Termination at a De-Rated BTU
The diagrams show all allowable combina-
tions of straight horizontal termination using
Rigid Pipe. Restrictor position "A". Refer to
the "Conversion Kit to Lower BTU Rating"
section for de-rating instructions.
INSTALLATION
*If this is an outside corner, the minimum dis-
tance between the vent and the outside corner
is 6” (15cm). See “F” on the diagram in the
"Exterior Vent Terminal Locations" section.
Dura-Vent Snorkel Termination Riser Vent Termination