Installation, Double door installation, Decorative door grill installation – Hampton Direct H35-NG1 User Manual

Page 35: Tile inset installation

Advertising
background image

Hampton

®

H35 Direct Vent Freestanding Gas Stove

35

INSTALLATION

DOUBLE DOOR

INSTALLATION

1) Secure the Top Door Clip into the Top Front

Casting.

Rear View of

Decorative Door Grill

Top Clip

Bottom Clip

Bottom Clip

DECORATIVE DOOR

GRILL INSTALLATION

1) Hook the Top Clip on the Decorative Door

Grill into the top lip of the Front Casting.

2) Lift the Decorative Door Grill slightly and

drop the Bottom Clips into the bottom lip of
the Front Casting.

Top Door Clip

2) Pull all four door hinges out from the sides

of the Front Casting.

3) Fasten the Right Door to the 2 right hinges

(2 screws per hinge). Repeat for the Left
Door.

TILE INSET

INSTALLATION

Side Tile Inset

1) Slide the Standard Side Tile Inset out to-

wards the back of the unit.

2) Slide the Optional Side Tile Inset into the

side panel, over the spring clip.

3) Repeat

for

other

side.

Top Tile Inset

1) Lift the Cast Top off the unit.

5) Replace the Cast Top on the unit.

Tile Clip

Tile Clip

Tile Clip

2) Place the Cast Top face down on a soft

surface. Take care not to scratch the fi nish
on the Top.

3) Remove the Tile Clips holding the Standard

Tile Insets in place.

4) Place the Optional Tile Insets into posi-

tion and secure with a top and bottom Tile
Clip.

Advertising
This manual is related to the following products: