Hand Held Products QUICK CHECK 890 - Manual (Page 15)

Quick Check® 890 User’s Guide 2 - 7
Once you select Finish, your device is ready to communicate with the QC890
Verifier via the assigned ports. Make a note of the assigned port number. You
will need to know this port number in the following installation steps.
Enabling QCID for Bluetooth
1. Once you open the QCID application, click on File -> Preferences.
2. Choose the assigned incoming port number reported in the Add Bluetooth
Device wizard.
3. Click OK.
4. Your QC890 Verifier then connects to the QCID application.