Hand Held Products QUICK CHECK 890 - Manual (Page 24)

3 - 6 Quick Check® 890 User’s Guide
Note: The QC3800V reading width (includes quiet zones) is 6 inches.
Note: The QC3800V is the only device that can be used as a non-contact input
device with a QC890 Verifier unit. The QC3800V should not be used with
any decoders, terminals, or other brand of verifiers.
Calibration Log
The Calibration Log records the instances when calibration was performed. It
records the Date/Time set on your PC, serial number of the QC890 Verifier being
calibrated, and the name and location of the operator. To access the Calibration
Log, click on Settings -> Calibration -> Calibration Log.
You will be prompted to enter a password. The password can be either the
Master Password (Visions07) or a password you previously set.